Introduction:

• Safety First: Begin by disconnecting the vehicle's battery to ensure a secure installation process.

WAG Light Installation Steps:

• Identify Mounting Locations:

  • Select strategic locations on the emergency vehicle for optimal visibility.

  • Ensure the chosen areas do not obstruct other emergency lights.

• Prepare the Surface:

  • Clean the selected mounting surfaces thoroughly.

  • Use a degreaser to remove any residue that may affect adhesion.

• Secure Mounting Brackets:

  • Attach the mounting brackets using the provided hardware.

  • Position the brackets securely to support the weight of the WAG lights.

• Mount the WAG Lights:

  • Affix the WAG lights onto the installed brackets.

  • Tighten the screws to ensure a stable and vibration-free attachment.

• Wiring Diagrams:

  1. Connect WAG Lights to Power Source:

     • Locate the positive and negative terminals on the vehicle's battery.

     • Connect the positive wire from the WAG lights to the positive terminal and the negative wire to the negative terminal.

  2. Install a Toggle Switch:

     • Connect a toggle switch to the positive wire from the WAG lights.

     • Connect the other end of the toggle switch to a power source with a fuse.

  3. Add a Relay for Enhanced Control:

     • Connect the relay's control wire to the toggle switch.

     • Connect the relay's power wire to the vehicle's battery.

  4. Grounding:

     • Connect the ground wire from the WAG lights to a clean, unpainted metal surface on the vehicle's chassis.

  5. Fuse Protection:

     • Install an appropriate fuse in the positive wire to protect the WAG lights and the vehicle's electrical system.

• Testing:

  • Reconnect the vehicle's battery.

  • Toggle the switch to test the WAG lights.

  • Ensure all lights are functioning correctly.

• Adjustment and Finalization:

  • Fine-tune the positioning of the WAG lights for optimal visibility.

  • Secure any loose wiring with cable ties to prevent interference with other vehicle components.

• Regulatory Compliance:

  • Check and adhere to local regulations regarding emergency vehicle lighting.

  • Ensure that the installation meets the required standards for color, brightness, and placement.

• Regular Maintenance:

  • Periodically inspect the WAG lights and wiring for signs of wear or damage.

  • Clean the lights to maintain maximum visibility.

Conclusion: Enhancing the visibility of emergency vehicles is crucial for the safety of both responders and the public. By following these installation steps and wiring diagrams, you can effectively install WAG lights on an emergency vehicle, contributing to a safer and more visible response in critical situations. Always prioritize safety, compliance with regulations, and regular maintenance to ensure the ongoing functionality of the installed lights.