T-Bone

View Original

Introduction to Coding a Simple "Hello World" Program for Arduino and Raspberry Pi

T Bone

Creating a "Hello World" program is a great way to get started with programming microcontrollers like Arduino and single-board computers like Raspberry Pi. This tutorial will guide you through the process of writing and running a basic "Hello World" program on both platforms.

Arduino

Requirements

  • Arduino board (e.g., Arduino Uno)

  • USB cable

  • Arduino IDE installed on your computer

Steps

  1. Install the Arduino IDE:

    • Download and install the Arduino IDE from the official website.

  2. Connect your Arduino board:

    • Use a USB cable to connect your Arduino board to your computer.

  3. Open the Arduino IDE:

    • Launch the Arduino IDE. You'll see a blank sketch with setup() and loop() functions.

  4. Write the "Hello World" code:

    void setup() {
  // Initialize the serial communication at 9600 bits per second
  Serial.begin(9600);
}

void loop() {
  // Print "Hello, World!" to the serial monitor
  Serial.println("Hello, World!");
  // Wait for a second
  delay(1000);
}

    5. Upload the code to the Arduino:

    • Select your Arduino board model from the Tools > Board menu.

    • Select the correct port from the Tools > Port menu.

    • Click the Upload button (right-pointing arrow).

    6. View the output:

    • Open the Serial Monitor from the Tools menu.

    • Ensure the baud rate is set to 9600.

    • You should see "Hello, World!" printed every second.

Explanation

  • setup(): This function runs once when the Arduino is powered on or reset. Here, we initialize serial communication at a baud rate of 9600.

  • loop(): This function runs repeatedly after the setup() function. We print "Hello, World!" to the serial monitor and wait for one second before repeating.

Raspberry Pi

Requirements

  • Raspberry Pi (any model)

  • MicroSD card with Raspberry Pi OS installed

  • Power supply

  • HDMI cable and monitor (optional, if using headless setup)

  • Keyboard and mouse (optional, if using headless setup)

  • SSH enabled (optional, if using headless setup)

Steps

  1. Set up your Raspberry Pi:

    • Install Raspberry Pi OS on your microSD card using the Raspberry Pi Imager.

    • Insert the microSD card into the Raspberry Pi and power it on.

    • Complete the initial setup if using a monitor, or connect via SSH if headless.

  2. Open a terminal:

    • If using a monitor, open the Terminal application.

    • If using SSH, connect to your Raspberry Pi using an SSH client.

  3. Write the "Hello World" code:

    • Create a new file named hello_world.py using a text editor:

      sh 
      nano hello_world.py

      Enter the following code:

      Python

      print("Hello, World!")

      4. Run the code:

      Execute the script by running:

      sh

      python3 hello_world.py

      5. View the output:

      • You should see "Hello, World!" printed in the terminal.

    Explanation

    • print("Hello, World!"): This line of code prints the text "Hello, World!" to the terminal.

    Conclusion

    You've successfully written and executed a "Hello World" program on both Arduino and Raspberry Pi. This basic exercise helps you understand the workflow for programming these platforms. From here, you can explore more advanced projects, integrating sensors, actuators, and other peripherals to create more complex and interactive systems. Happy coding!